Civil Experiences Best Education Blog

Join WhatsApp groups and get 100% Free product coupon/Week and many more... Join the largest community now.

Join WhatsApp Group
If you don't join, then you're missing something big.

Fluid Mechanics MCQs | Civil Engineering MCQs for Fluid Mechanics

Rate this post

Fluid Mechanics MCQs | Civil Engineering MCQs for Fluid Mechanics

In this article, you will get all Fluid Mechanics MCQs with answers for best practices for competitive exams to crack competitive exams will always update our article and add more and more MCQ so bookmark and share the civil experience sites for future learning.

Here in civil experience best civil engineering website, you will get the best learning and study materials, article, pdf, ppt, reports, etc for Fluid Mechanics and others also so must join a civil experience blog and learn every day

Poisson’s ratio for cork is ______.




ANSWER= [C] 0
The correct answer for Poisson’s ratio for cork is Zero.

The maximum permissible limit for fluoride in drinking water is




ANSWER= [C] 1.50 mg/liter
The maximum permissible limit for fluoride in drinking water is 1.50 mg/liter.

The chemical most commonly used for increasing the speed of sedimentation of sewage is




ANSWER= [C] Lime
The chemical most commonly used for increasing the speed of sedimentation of sewage is Lime.

The sewer which receives the discharge of a number of house sewer is called




ANSWER= [B] Lateral sewer
The sewer which receives the dischange of a number of house sewer is called Lateral sewer.

The process in which chlorination is done beyond the breakpoint is known as




ANSWER= [C] Super chlorination
The process in which chlorination is done beyond the breakpoint is known as Super chlorination.

In the case of Newtonian Fluid, which of the following statements is correct?




ANSWER= [B] Absolute viscosity of fluid remains constant with variation in the rate of angular deformation
Amrita Shergil – Kangra is not matched correctly with the place shown in front of his/her name.

In static fluid, the pressure on a stationary plain vertical surface causes the center of pressure to always be below the centroid of the plain surface. The correct reasoning of the said statement is




ANSWER = [C] The pressure increases linearly with depth below the free surface

The ratio of inertia force to viscous force is known as




ANSWER= [A] Reynolds number

Identify the place/places in Himachal Pradesh where the building of Panchayati Raj Training Institute are constructed: Mashobra

The observed mean flow velocity of water in a pipe of 5 cm diameter was found to be 10 cm/s, what would be the value of Reynolds number for the above flow condition?




ANSWER= [A] 5000

The observed mean flow velocity of water in a pipe of 5 cm diameter was found to be 10 cm/s, 5000 be the value of Reynolds number for the above flow condition

The mean flow depth and mean velocity in a rectangular channel were found to be 1.0 m and 0.60 m/s respectively. The flow condition in the rectangular channel can be classified as ____




ANSWER = [A] Mizoram

The mean flow depth and mean velocity in a rectangular channel were found to be 1.0 m and 0.60 m/s respectively. The flow condition in the rectangular channel can be classified as Subcritical

Also Read: Civil Engineering MCQs for Fluid Mechanics MCQ Part 2
Civil Experience
Author Aakash Dudhat

It is my pleasure to welcome you to civilexperiences.com, a website created and managed by Dudhat Aakash. In addition to having a Bachelor's degree in Civil Engineering

Leave a Comment

Join Our WhatsApp Group!