Strength of Materials MCQ

Strength of Materials MCQ

Civil engineering MCQ and strength of materials MCQ for competitive exam

A member with a cross-section of A and length L is subjected to a force of P. If Young’s Modulus is E, then the linear strain will be


Deflection of a

ANSWER = [D] All the above

calcite is a significant constituent of sedimentary rock.

If a rectangular beam measuring 10 × 18 × 400 cm carries a uniformly distributed load such that the bending stress developed is 100 kg/cm2. The intensity of the load per meter length, is

ANSWER = [D] 250 kg

If the Poisson’s ratio of a material is 0.25, the ratio of Modulus of Rigidity to Young’s Modulus will be

ANSWER = [B] 0.4

Sandy porous media has a high specific yield

Bulk Modulus (K), Young’s Modulus (E) and Poisson’s Ratio (m) are related by

ANSWER= [D] E = 3K(1 – 2m)

On a ladder resting on smooth ground and leaning against a vertical wall, the force of friction will be

ANSWER= [B] Upwards at its upper end

A plate 100 mm wide, 10 mm thick is having a hole of diameter of 10 mm symmetrical about the axis of the plate. The plate is subjected to a force of 9 kN. The maximum stress on a section passing through center of the hole will be

ANSWER = [B] > 10 N/mm2

An isotropic material is the one which

ANSWER= [C] has the elastic constants, identical in all the direction

From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate

ANSWER= [B] 0.5 cm

The canal falls are needed in the canal network for Designed slope is smaller than available ground slope

357k people like this. Be the first of your friends.

You may like these posts

  1. To insert a code use <i rel="pre">code_here</i>
  2. To insert a quote use <b rel="quote">your_qoute</b>
  3. To insert a picture use <i rel="image">url_image_here</i>

Most Demanded by User

Website is locked Press Subscribe or Share to unlock!